
; CHEK v1.2         CYCLIC REDUNDANCY CHECK               03/30/83
;
; CHEK can read any CP/M file then print a CRC (CYCLIC-REDUNDANCY-CHECK)
; number based on the CCITT standard polynominal for asynchronous use:
;
;                    X^16 + X^12 + X^5 + 1
;
; Useful for checking accuracy of file transfers.  Far more accurate
; than a simple checksum.  It will optionally write an output file to
; the default drive, listing the CRC's of all files requested.
;
; =  =  =  =  =  =  =  =  =  =  =  =  =  =  =  =  =  =  =  =  =  =  =  =
;
; COMMANDS:  CHEK [drive:]<filename.filetype> [F]
;
; Examples:
;            CHEK B:HELLO.ASM    check only HELLO.ASM
;            CHEK *.ASM          check all .ASM  files
;            CHEK *.*            check all files, check disk quality
;            CHEK *.* F          makes disk file named CHEKLIST.CRC
;            CHEK *.* FF         makes disk file named FF.CRC
;            CHEK *.* FILE       makes disk file named FILE.CRC
;            CHEK *.* HELLO.ABC  makes disk file named HELLO.ABC
;
; NOTE:  If 0103H is 0, no disk file is made regardless of request.
;
; NOTE TO SYSOPS:   Set FILEOK: and SYSOK: (0103 and 0104) both to '0'
;                   to prevent remote users from creating a file or to
;                   find restricted '.SYS' files.
;
;		    (If 0103H is 0, no disk file is made, regardless of
;		    request.)
;
; *     *     *     *     *     *     *     *     *     *     *     *
;
; 03/30/83  Restored the character count.  A series of tests were made
;	    using 14 files totalling 2596 records.  With character count
;   v1.2    it took 5:03, with 1.1 version took 5:01.  The difference in
;	    time is too trivial to abandon an informative feature.  Re-
;	    stored the heading line to any disk file, which was always
;	    my intent.  Numerous trivial changes to improve the appear-
;	    ance of the source code.	- Irv Hoff
;
; 03/26/83  Fixed bug in register usage.  Upon completion of the program
;	    FINCRC was making the ending calculation with the character
;   v1.1    in the wrong register.  Restored the copyright notice to the
;	    CRC area.  Removed the character count as redundant and time-
;	    consuming.  Removed the heading from the disk file to make
;	    the file easily machine-readable.
;					- Gary Novosielski
;
; 02/02/83  Started this program.  It is similar to the CRCK series but
;	    with a different algorithm (as shown above).  This one has
;   v1.0    been accepted as the standard by a number of programs, such
;	    as the COMM700, MDM700, MODEM200, MODEM700 and XMODEM series.
;	    Packet radio and other SDLC networking systems use the same
;	    algorithm.  This now standardizes CHEK with these other pro-
;	    programs.
;		Added total records in file for additional check.  Also
;	    show the total character count for general information.  Re-
;	    formatted the dipsplayed results.  The heading and version
;	    number now appear in any disk file.  Minor additional changes.
;		Optional disk file named CHEKLIST.CRC by default with a
;	    "F", or whatever name you prefer if you type something dif-
;	    ferent, such as FILE.CHK.  See examples.
;						- Irv Hoff
;
; 06/27/79 CRCK v4.2 by Keith Petersen, W8SDZ
;
; *     *     *     *     *     *     *     *     *     *     *     *
;
;
; DEFINE TRUE AND FALSE
;
TRUE:	EQU	0FFH
FALSE:	EQU	0
;
;
; CONDITIONAL ASSEMBLY SWITCHES
;
STDCPM:	EQU	TRUE		;TRUE FOR STANDARD CP/M
ALTCPM:	EQU	FALSE		;TRUE FOR H8 OR TRS-80
;
;
; SYSTEM EQUATES
;
	 IF	STDCPM
BASE:	EQU	0000H		;FOR STANDARD CP/M USERS
	 ENDIF
;
	 IF	ALTCPM		;FOR H8 OR TRS-80
BASE:	EQU	4200H
	 ENDIF
;
; 
; BDOS EUATES
; 
RDCON:	EQU	1
WRCON:	EQU	2
PRINT:	EQU	9
CSTAT:	EQU	11
OPEN:	EQU	15
CLOSE:	EQU	16
SRCHF:	EQU	17
SRCHN:	EQU	18
DELET:	EQU	19
READ:	EQU	20
WRITE:	EQU	21
MAKE:	EQU	22
RENAM:	EQU	23
STDMA:	EQU	26
;
;
; FILE HANDLING EQUATES
;
BUFSIZ:	EQU	80H		;BUFFER SIZE (128 BYTES)
BDOS:	EQU	BASE+5
FCB:	EQU	BASE+5CH 
FCB2:	EQU	BASE+6CH
FCBEXT:	EQU	FCB+12
FCBRNO:	EQU	FCB+32
TBUF:	EQU	BASE+80H	;TEMPORARY BUFFER (DEFAULT) ADDRESS
;
;
; CONTROL CHARACTERS
;
CTLC:	EQU	'C'-40H		;CONTROL-C CHARACTER
EOF:	EQU	'Z'-40H		;END-OF-FILE CHARACTER
LF:	EQU	'J'-40H		;LINE FEED CHARACTER
CR:	EQU	'M'-40H		;CARRIAGE RETURN CHARACTER
TAB:	EQU	'I'-40H		;TAB CHARACTER
;
;
; *   *   *   *   *   *   *   *   *   *   *   *  *   *   *   *   *   *
;
;
	  ORG	BASE+100H
;
;
CHEK:	  JMP	BEGIN		;JUMP AROUND PATCH PARAMETERS
;
;
FILEOK:	  DB	1	;0 = No, 1 = Yes  TO ALLOW DISK FILE OF RESULTS
SYSOK:	  DB	1	;0 = No, 1 = Yes  TO ALLOW HANDLING '.SYS' FILES
;
;
;***********************************************************************
;                                                                      ;
;                     PROGRAM STARTS HERE                              ;
;                                                                      ;
;***********************************************************************
;
;
BEGIN:	POP	H		;GET CCP RETURN ADDRESS
	SHLD	EXIT+1
	LXI	SP,STACK	;INITIALIZE LOCAL STACK
	MVI	A,1
	STA	MFFLG1		;INIT 1ST TIME SWITCH
	STA	NFLAG		;NO FILES FOUND YET
	MVI	A,' '		;NO OUTPUT FILE YET
	STA	FFLAG		;'CRC' DISK FILE FLAG
	LDA	FCB+1
	CPI	' '		;SEE IF NAME THERE
	JNZ	BEGIN2		;YES, CONTINUE
;
	CALL	ERXIT		;PRINT MSG, THEN EXIT
	DB	CR,LF,LF,LF,'     ++ No file name specified ++'
	DB	CR,LF,LF,LF,LF,'     '
	DB	'COMMANDS:  CHEK [drive:]<filename.filetye> FILE'
	DB	CR,LF,LF,LF,'     '
	DB	'Examples:  CHEK B:HELLO.ASM     check only HELLO.ASM'
	DB	CR,LF,'                '
	DB	'CHEK *.ASM           check only .ASM files'
	DB	CR,LF,'                '
	DB	'CHEK *.*             check all files, check disk quality'
	DB	CR,LF,'                '
	DB	'CHEK *.* F           makes disk file named CHEKLIST.CRC'
	DB	CR,LF,'                '
	DB	'CHEK *.* FF          makes disk file named FF.CRC'
	DB	CR,LF,'                '
	DB	'CHEK *.* FILE        makes disk file named FILE.CRC'
	DB	CR,LF,'                '
	DB	'CHEK *.* HELLO.ABC   makes disk file named HELLO.ABC'
	DB	CR,LF,LF,LF,'     '
	DB	'NOTE:  If byte 0103 is 0, no disk file is made regard'
	DB	'less of request'
	DB	CR,LF,LF,'$'
;
;
; FIND AMOUNT OF SPACE FOR BUFFER
;
BEGIN2:	LXI	D,FILADR	;START OF BUFFER ADDRESS
	LDA	BDOS+2		;GET 'BDOS' ADDRESS
	SUI	8		;PROTECT 'CCP'
	MOV	H,A		;GET THE MAIN PAGE
	XRA	A		;CLEAR CARRY IF SET
;
;
; CALCULATE THE DIFFERENCE TO GET SPACE AVAILABLE
;
	SUB	E
	MOV	L,A
	MOV	A,H
	SBB	D
	MOV	H,A
;
;
; FREE SPACE AVAILABLE NOW IN 'HL', SO STORE FOR BUFFER SIZE
;
	SHLD	FILLEN		;STORE BUFFER LENGTH
;
;
; DECLARE 'FCB' FOR  OUTPUT FILE (TEMPORARILY NAMED CHEKLIST.$$$)
;
	LDA	FILEOK		;OK TO MAKE A '.CRC' DISK FILE?
	ORA	A
	JZ	AGAIN		;EXIT, IF NOT
	LDA	FCB2+1		;GET OPTION
	STA	FFLAG		;'CRC' DISK FILE FLAG
	CPI	' '		;FILE WANTED?
	JZ	AGAIN		;NO, SKIP FILE INITIALIZATION
;
	XRA	A
	STA	FCBFIL+12	;CLEAR EXTENT
	STA	FCBFIL+32	;CLEAR CURRENT RECORD COUNT
	LXI	H,0
	SHLD	FILEPTR		;RESET FILE POINTERS
	MVI	C,DELET		;'DELETE FILE' FUNCTION
	LXI	D,FCBFIL	;DELETE 'OLD' CHEKLIST FILE
	CALL	BDOS
	MVI	C,MAKE		;'MAKE FILE' FUNCTON
	LXI	D,FCBFIL	;MAKE 'NEW' CHEKLIST FILE
	CALL	BDOS
	INR	A		;MAKE THE NEW FILE OK?
	JNZ	CPYNAM		;COPY THE FILE NAME REQUESTED
	MVI	C,PRINT		;PRINT STRING FUNCTION
	LXI	D,DIRFUL	;INDICATE THAT DIRECTORY IS FULL
	CALL	BDOS
	JMP	FILERR
;...
;
;
CPYNAM:	LDA	FCB2+1		;CHECK FOR FILE NAME
	CPI	'F'		;SEE IF "QUICK NAME FOR CHEKLIST.CRC
	JNZ	CPYN1		;IF NOT, USE FILE NAME ASKED FOR   
	LDA	FCB2+2		;IF "F" CHECK NEXT COLUMN
	CPI	' '		;BLANK?
	JZ	AGAIN		;IF YES, LEAVE NAME CHEKLIST.CRC
;
CPYN1:	LDA	FCB2+9		;EXTENT REQUESTED BY OPERATOR?
	CPI	' '
	JZ	CPYN2		;IF NOT USE OUR '.CRC' BY DEFAULT
	MVI	A,12		;OTHERWISE USE THE ONE REQUESTED
	STA	CPYN3+1
;
CPYN2:	LXI	H,FCB2		;TRANSFER THE REQUESTED NAME
	LXI	D,FCBFIN
;
CPYN3:	MVI	C,9 		;FILENAME IS 1+8 LENGTH
;
CPYN4:	MOV	A,M
	STAX	D
	INX	H
	INX	D
	DCR	C
	JNZ	CPYN4
;...
;
;
AGAIN:	LXI	SP,STACK	;RE-INIT STACK POINTER
	CALL	MFNAME		;SEARCH FOR NAMES
	JNC	NAMTST		;ANOTHER FOUND, PRINT NAME
	LDA	NFLAG		;NOTHING FOUND, CHECK...
	ORA	A		;... FIRST TIME FLAG
	JZ	DONE		;AT LEAST ONE WAS FOUND
	CALL	ABEXIT		;PRINT MSG, THEN EXIT
	DB	CR,LF,'++ File(s) not found ++$'
;
DONE:	LDA	FFLAG		;MAKING A '.CRC' DISK FILE?
	CPI	' '
	JZ	DONE1		;NO, SKIP THE FILE STUFF
;
;
; CLOSE CHEKLIST.$$$
;
CLSFIL:	LHLD	FILEPTR
	MOV	A,L
 	ANI	07FH
	JNZ	CLSF1
	SHLD	FILLEN
;
CLSF1:	MVI	A,EOF
	PUSH	PSW
	CALL	PTFIL
	POP	PSW
	JNZ	CLSFIL
	MVI	C,CLOSE
	LXI	D,FCBFIL
	CALL	BDOS
	INR	A
	JNZ	ERASE
	MVI	C,PRINT
	LXI	D,NOCLOS
	CALL	BDOS
;
;
; ERASE ANY EXISTING OLD FILE
;
ERASE:	MVI	C,DELET
	LXI	D,FCBFIN
	CALL	BDOS
;
; 
; RENAME CHEKLIST.$$$ TO CHEKLIST.CRC
;
	LXI	H,FCBFIL
	LXI	D,FCBFIN
	PUSH	H
	LXI	B,16
	DAD	B
;
MOVNAM:	LDAX	D
	MOV	M,A
	INX	D
 	INX	H
	DCR	C
	JNZ	MOVNAM
	POP	D
	MVI	C,RENAM
	CALL	BDOS
;
; 
; NOW EXIT TO CP/M
;
DONE1:	CALL	MSGXIT		;PRINT 'DONE' THEN EXIT
	DB	CR,LF,'Done',CR,LF,'$'
;.....
;
; 
; TEST FOR NAMES TO IGNORE
; 
NAMTST:	LDA	SYSOK		;SEE IF '.SYS' FILES ALLOWED
	ORA	A
	JNZ	DOSYS		;IF ALLOWED, EXIT
	LDA	FCB+10		;GET 'SYS' ATTRIBUTE
	ANI	80H		;IS IT 'SYS'?
	JNZ	AGAIN		;YES, IGNORE THIS FILE
;
;
; IGNORE FILES WITH .$$$ FILETYPE (THEY ARE USUALLY ZERO-LENGTH AND
; CLUTTER UP OUR DISPLAY.  WE ALSO WANT TO IGNORE OUR CHEKLIST.$$$
; TEMPORARY FILE).
; 
DOSYS:	LXI	H,FCB+9		;POINT TO FILETYPE IN 'FCB'
	CALL	TSTBAD		;CHECK FOR .$$$ FILES
	JZ	AGAIN		;IF ZERO FLAG, IGNORE THEM
	XRA	A		;FOUND SOME NAMES
	STA	NFLAG
	CALL	SIGNON
;
;
; MOVE 8 CHARACTERS FROM FCB+1 TO FNAME
;
	LXI	H,FCB+1
	LXI	D,FNAME
	LXI	B,8
	CALL	MOVER
;
;
; MOVE 3 CHARACTERS FROM FCB+9 TO FNAME+9
;
	LXI	H,FCB+9
	LXI	D,FNAME+9
	LXI	B,3
	CALL	MOVER
;
;
; NOW PRINT FILENAME.TYPE
;
	CALL	ILPRT		; PRINT:
;
FNAME:	DB	'XXXXXXXX.XXX     ',0
;
;
; OPEN THE FILE
;
	LXI	D,FCB
	MVI	C,OPEN
	CALL	BDOS
	INR	A
	JNZ	RDINIT
;
	CALL	ABEXIT
	DB	'++ OPEN FAILED ++$'
;
; 
; INITIALIZE 'CRC' TO ZERO AND SET 'BUFAD' TO CAUSE INITIAL READ
;
RDINIT:	LXI	H,0
	SHLD	CRCVAL		;RESET VALUE TO ZERO FOR NEW CHECK
	LXI	H,BASE+100H
	SHLD	BUFAD		;INIT BUFFER ADRRESS
;
;
; INITIALIZE CHARACTER COUNT TO ZERO
;
	LXI	H,COUNTN	;CLEAR THE CHARACTER COUNTER
	MVI	B,6
	CALL    RDIN1
;
;
; INITIALIZE RECORD COUNT TO ZERO
;
	LXI	H,COUNTR	;CLEAR THE RECORD COUNTER
	MVI	B,3
	CALL	RDIN1
	JMP	READIT
;
RDIN1:	MVI     M,' '
	INX	H
	DCR	B
	JNZ	RDIN1
	MVI	M,'0'		;USE A DECIMAL '0' FOR EMPTY FILE
	RET
;...
;
;
; THIS IS THE READ LOOP
;
READIT:	LHLD	BUFAD
	MOV	A,H		;TIME TO READ?
	CPI	BASE SHR 8
	JZ	NORD		;NO READ
	MVI	C,CSTAT
	CALL	BDOS		;CHECK FOR OPERATOR ABORT
	ORA	A
	JZ	READ1		;NOTHING TO READ, EXIT
	MVI	C,RDCON
	CALL	BDOS		;GET CHARACTER INPUTTED
	CPI	CTLC		;CONTROL-C?
	JZ	ABEXT1		;YES EXIT
;
READ1:	LXI	D,FCB
	MVI	C,READ		;READ ANOTHER SECTOR OF FILE
	CALL	BDOS
	ORA	A		;CHECK RETURN CODE
	JNZ	FINISH		;ERROR OR 'EOF'
	CALL	COUREC		;INCREMENT THE RECORD COUNT
	LXI	H,TBUF		;BUFFER LOCATION
;
NORD:	MOV	A,M		;GET FILE CHARACTER
	INX	H
	SHLD	BUFAD
	CALL	UPDCRC		;UPDATE THE 'CRC' VALUE
	CALL	COUCHR		;INCREMENT THE CHARACTER COUNT
	JMP	READIT		;GO READ MORE CHARACTERS
;.....
;
;
FINISH:	CPI	1		;NORMAL END-OF-FILE?
	JNZ	FILERR		;NO, IT WAS A READ ERROR
;
FINCRC:	XRA	A
	CALL	UPDCRC
	XRA	A
	CALL	UPDCRC
	LDA	CRCVAL+1	;GET MSP OF 'CRC'
	CALL	HEXO		;PRINT IT
	MVI	A,' '		;SEPARATE 'LSP' AND 'LST'
	CALL	TYPE
	LDA	CRCVAL		;GET 'LSP' OF 'CRC'
	CALL	HEXO		;PRINT IT
	CALL	ILPRT		;PRINT FOLLOWING MESSAGE
	DB	'   '
;
COUNTN:	DB	'       '	;GIVES CHARACTER COUNT
	DB	'    '
;
COUNTR:	DB	'    ',0	;GIVES RECORD COUNT
	CALL	CRLF		;TURN UP NEW LINE
	JMP	AGAIN		;SEE IF MORE FILES TO DO
;.....
;
; 
FILERR:	CALL	ABEXIT		; ABORT BECAUSE OF FILE READ ERROR
	DB	'++ File read error ++$'
;.....
;
; HEX OUTPUT
; 
HEXO:	PUSH	PSW		;SAVE FOR RIGHT DIGIT
	RAR			;RIGHT..
	RAR			;..JUSTIFY..
	RAR			;..LEFT..
	RAR			;..DIGIT..
	CALL	NIBBL		;PRINT LEFT DIGIT
	POP	PSW		;RESTORE RIGHT
;
NIBBL:	ANI	0FH		;ISOLATE DIGIT
	CPI	10		;IS IS LESS THAN 10?
	JC	ISNUM		;YES, NOT ALPHA
	ADI	7		;ADD ALPHA BIAS
;
ISNUM:	ADI	'0'		;CONVERT FROM BINARY TO ASCII
	JMP	TYPE		;PRINT IT, THEN RETURN
;.....
;
;
; INLINE PRINT ROUTINE
;
ILPRT:	XTHL			;SAVE 'HL', GET MSG
;
ILPLP:	MOV	A,M		;GET CHAR
	CALL	TYPE		;OUTPUT IT
	INX	H		;POINT TO NEXT
	MOV	A,M		;TEST
	ORA	A		;..FOR END
	JNZ	ILPLP
	XTHL			;RESTORE 'HL', RETURN ADDRESS
	RET			;RETURN PAST MSG
;.....
;
;
; COUNT RECORDS CHECKED
;
COUREC:	PUSH	H		;SAVE THE CURRENT ADDRESS
	LXI	H,COUNTR+3
	MVI	C,4
	JMP	COUNT		;COUNTS UP TO 9,999 RECORDS
;...
;
;
; COUNT CHARACTERS CHECKED
;
COUCHR:	PUSH	H
	LXI	H,COUNTN+6	;CHARACTER COUNT STORAGE
	MVI	C,7		;COUNTS UP TO 9,999,999 CHARACTERS
;
;
; COUNTER FOR CHARACTERS / RECORDS CHECKED
;
COUNT:	PUSH	D		;SAVE THE REGISTER VALUES
	PUSH	B
;
COUNT1:	CALL	COUNT2		;INCREMENT THE STORAGE COUNT
	JNZ	COUNT4		;FINISHED IF NOT GOING ANY FURTHER
	DCX	H		;DECREMENT STORAGE LOCATION
	DCR	C		;ONE COLUMN LESS TO DO
	JNZ	COUNT1		;IF NOT ZERO, PROCESS NEXT COLUMN
	JMP	COUNT4		;FINISHED IF ALL COLUMNS PROCESSED
;...
;
;
COUNT2:	MOV	A,M		;SET DIGIT TO "1" IF NOW A SPACE
	CPI	' '		;SEE IF A SPACE
	JNZ	COUNT3		;EXIT IF NOT
	MVI	A,'0'		;OTHERWISE CALL IT A DECIMAL '0'
;
COUNT3:	INR	A		;INCREMENT THE DIGIT
	MOV	M,A		;STORE NEW VALUE
	CPI	'9'+1		;READY TO GO PAST DECIMAL '9'?
	RNZ			;FINISHED IF NOT
	MVI	A,'0'		;OTHERWISE CALL IT A ZERO
	MOV	M,A		;STORE NEW VALUE
	RET			;RETURN TO AND INCREMENT NEXT COLUMN
;...
;
;
COUNT4:	POP	B		;RESTORE THE REG. VALUES
	POP	D
	POP	H
	RET			;ALL DONE
;.....
;
;
; SEND CARRIAGE RETURN, LINE FEED TO OUTPUT
;
CRLF:	MVI	A,CR		;CARRIAGE RETURN
	CALL	TYPE
	MVI	A,LF		;LINE FEED, FALL INTO 'TYPE'
;
;
; SEND CHARACTER IN 'A' REGISTER TO OUTPUT
; 
TYPE:	PUSH	B
	PUSH	D
	PUSH	H
	ANI	7FH		;STRIP OFF ANY PARITY
	MOV	E,A
	PUSH	D
	CALL	WRFILE		;WRITE TO FILE IF REQUESTED
	POP	D
	MVI	C,WRCON		;SEND CHARACTER TO CONSOLE
	CALL	BDOS
	POP	H
	POP	D
	POP	B
	RET
;.....
;
;
PTFIL:	PUSH	PSW		;SAVE OUTPUT CHARACTER
	LHLD	FILLEN		;GET CURRENT BUFFER LENGTH
	XCHG			;'DE' HAS LENGTH
	LHLD	FILEPTR		;LOAD NEXT TO GET/PUT TO 'HL'
	MOV	A,L		;COMPUTE CURRENT LENGTH
	SUB	E 	
	MOV	A,H
	SBB	D		;CARRY IF NEXT < LENGTH
	JC	PTCRC4		;CARRY IF LENGTH > CURRENT
	LXI	H,0		;END OF BUFFER, FILL (EMPTY) BUFFERS	
	SHLD	FILEPTR		;CLEAR NEXT TO GET/PUT
;
PTCRC1:	XCHG			;FILE POINTER TO 'DE'
	LHLD	FILLEN		;'HL' IS MAXIMUM BUFFER LENGTH
	MOV	A,E		;COMPUTE NEXT LENGTH
	SUB	L		;TO GET CARRY, IF MORE FILL
	MOV	A,D
	SBB	H		
	JNC	PTCRC3
	LHLD	FILADR		;GOT CARRY, MORE TO FILL YET
	DAD	D		;HL IS NEXT BUFFER ADDRESS
	XCHG
	MVI	C,STDMA		;SET 'DMA' ADDRESS
	CALL	BDOS
	LXI	D,FCBFIL	;'FCB' ADDRESS TO 'DE'
	MVI	C,WRITE		;FILE WRITE
	CALL	BDOS
	ORA	A		;CHECK RETURN CODE
	JNZ	PTCRC2		;END-OF-FILE YET?
	LXI	D,BUFSIZ	;NOT 'EOF', INCREMENT LENGTH BY 128
	LHLD	FILEPTR		;NEXT TO FILL
	DAD	D
	SHLD	FILEPTR		;SAVE NEW POINTER
	JMP	PTCRC1		;PROCESS ANOTHER SECTOR
;...
;
;
PTCRC2:	MVI	C,PRINT		;PRINT STRING FUNCTION
	LXI	D,DSKFUL	;DISK IS FULL
	CALL	BDOS
	POP	PSW		;CLEAN STACK
	JMP	FILERR		;FILE ERROR, EXIT
;...
;
;
PTCRC3:
	LXI	D,TBUF		;POINT TO TEMPORARY BUFFER
	MVI	C,STDMA		;SET 'DMA' FUNCTION
	CALL	BDOS
	LXI	H,0		;RESET POINTER FOR NEXT TO GET
	SHLD	FILEPTR
;
PTCRC4:	XCHG			;INDEX TO GET/PUT IN 'DE'
	LHLD	FILADR		;BASE OF BUFFER
	DAD	D		;ADDRESS OF CHARACTER IN 'HL'
	XCHG			;AND SWAP TO 'DE'
	POP	PSW		;GET SAVE CHARACTER
	STAX	D		;CHARACTER TO BUFFER
	LHLD	FILEPTR		;INDEX TO GET/PUT
	INX	H		;AND UPDATE FOR NEXT CHARACTER
	SHLD	FILEPTR
	RET
;.....
;
;
; PRINT SIGNON MESSAGE, AND INCLUDE ON DISK FILE
;
SIGNON:	DB	0		;GETS OVERWRITTEN TO "RET"
	CALL	ILPRT		;PRINT THE MESSAGE
;
SOM:	DB	CR,LF,'----CHEK--------ver 1.2-------03/30/83----',CR
	DB	LF,LF,'    FILE          CRC      CHARS   RECORDS'
	DB	CR,LF,LF,0
	MVI	A,0C9H		;'RET' TO ALLOW ONLY ONE SIGNON
	STA	SIGNON
	RET
;.....
;
;
; WRITE CHARACTER IN 'E' REGISTER TO OUTPUT FILE
;
WRFILE:	LDA	FFLAG		;MAKING A 'CRC' DISK FILE?
	CPI	' '		;IS IT SET?
	RZ			;NO, RETURN
	MOV	A,E		;GET CHARACTER BACK
	CALL	PTFIL
	RET
;.....
;
; 
; MULTI-FILE ACCESS SUBROUTINE.  ALLOWS PROCESSING OF MULTIPLE FILES
; (I.E., *.ASM) FROM DISK.  THIS ROUTINE BUILDS THE PROPER NAME IN THE
; FCB EACH TIME IT IS CALLED.  CARRY IS SET IF NO MORE NAMES CAN BE
; FOUND.
; 
MFNAME:	MVI	C,STDMA		;INIT 'DMA' ADDRESS AND 'FCB'
	LXI	D,TBUF
	CALL	BDOS
	XRA	A
	STA	FCBEXT
	STA	FCBRNO
;
;
; IF FIRST TIME
;
	LDA	MFFLG1
	ORA	A
	JZ	MFN01
;
;
; SAVE THE REQUESTED NAME - SAVE ORIGINAL REQUEST
;
	LXI	H,FCB
	LXI	D,MFREQ
	LXI	B,12
 	CALL	MOVER
	LDA	FCB
	STA	MFCUR		;SAVE DISK IN CURRENT 'FCB'
;
; SEARCH FOR THE FIRST REQUESTED NAME
;
	LXI	H,MFREQ
	LXI	D,FCB
	LXI	B,12
	CALL	MOVER
	MVI	C,SRCHF		;SEARCH FOR FIRST NAME
	LXI	D,FCB
	CALL	BDOS
	JMP	MFN02
; 
MFN01:	LXI	H,MFCUR
	LXI	D,FCB
	LXI	B,12
	CALL	MOVER
	MVI	C,SRCHF		;SEARCH FOR FIRST NAME
	LXI	D,FCB
	CALL	BDOS
;
;
; SEARCH FOR NEXT REQUESTED NAME
;
	LXI	H,MFREQ
	LXI	D,FCB
	LXI	B,12
	CALL	MOVER
	MVI	C,SRCHN		;SEARCH FOR NEXT NAME
	LXI	D,FCB
	CALL	BDOS
;
MFN02:	INR	A
	STC
	RZ
;
;
; MOVE NAME FOUND TO CURRENT NAME
;
	DCR	A
	ANI	3
	ADD	A
	ADD	A
	ADD	A
	ADD	A
	ADD	A
	ADI	128+1
	MOV	L,A
	MVI	H,BASE SHR 8
	PUSH	H		;SAVE NAME POINTER
	LXI	D,MFCUR+1
	LXI	B,11
	CALL	MOVER
;
;
; MOVE NAME FOUND TO FCB
;
	POP	H
	LXI	D,FCB+1
	LXI	B,11
	CALL	MOVER
;
;
; SETUP FCB
;
 	XRA	A
	STA	FCBEXT
	STA	FCBRNO
	STA	MFFLG1		;TURN OFF 1ST TIME SWITCH 
	RET
;.....
;
; 
; CHECK FOR .$$$ FILES
; 
TSTBAD:	CALL	TESTIT		;CHECK FIRST ONE FOR '$'
	RNZ			;NO, RETURN
	CALL	TESTIT		;CHECK SECOND ONE
	RNZ			;NO, RETURN
;...
;
;
TESTIT:	MOV	A,M
	ANI	7FH		;STRIP ATTRIBUTE
	CPI	'$'		;CHECK FOR $ FILETYPE
	INX	H
	RET
;.....
;
; 
; MOVE (BC) BYTES FROM (HL) TO (DE)
; 
MOVER:	MOV	A,M
	STAX	D
	INX	H
	INX	D
	DCX	B
	MOV	A,B
	ORA	C
	JNZ	MOVER
	RET
;..... 
;
;
; ABORTED - PRINT REASON.  IF MAKING OUTPUT FILE, CLOSE THE INCOMPLETE
; FILE TO UPDATE CP/M'S BIT MAP, THEN ERASE IT.
; 
ABEXIT:	POP	D		;GET MSG ADRS
	MVI	C,PRINT
	CALL	BDOS		;PRINT MSG
;
ABEXT1:	LDA	FFLAG		;SEE IF WE ARE MAKING A DISK FILE
	CPI	' '
	JZ	ABEXT4		;IF NOT, EXIT
;
ABEXT2:	LHLD	FILEPTR
	MOV	A,L
	ANI	07FH
	JNZ	ABEXT3
	SHLD	FILLEN
;
ABEXT3:	MVI	A,EOF
	PUSH	PSW
	CALL	PTFIL
	POP	PSW
	JNZ	ABEXT2
 	MVI	C,CLOSE
	LXI	D,FCBFIL
	CALL	BDOS
	INR	A
	JNZ	ERACRC
	MVI	C,PRINT
	LXI	D,NOCLOS
	CALL	BDOS
;
;
; ERASE INCOMPLETE FILE
;
ERACRC:	MVI	C,DELET
	LXI	D,FCBFIL
	CALL	BDOS
;
ABEXT4:	CALL	ERXIT		;PRINT MSG, EXIT
	DB	CR,LF,LF,'++ ABORTED ++',CR,LF,'$'
;
;
; EXIT WITH MESSAGE
; 
MSGXIT:	DS	0		;EXIT WITH "INFORMATIONAL" MESSAGE
;
ERXIT:	POP	D		;GET MSG
	MVI	C,PRINT
	CALL	BDOS
;
; 
; EXIT, RESTORING STACK AND RETURN TO 'CCP'
; 
EXIT:	JMP	0000H		;OVERWRITTEN WITH 'CCP' RETURN
;.....
;
;
DIRFUL:	DB	CR,LF
	DB	'++ NO DIRECTORY SPACE FOR CRC FILE ++',CR,LF,'$'
;
DSKFUL:	DB	CR,LF
	DB	'++ NO DISK SPACE FOR CRC FILE ++',CR,LF,'$'
;
NOCLOS:	DB	CR,LF
	DB	'++ CANNOT CLOSE CRC FILE ++',CR,LF,'$'
;.....
;
;
;-----------------------------------------------------------------------
;
; CRCSUBS (Cyclic Redundancy Code Subroutines) version 1.20
; 8080 Mneumonics
;
; These subroutines will compute and check a true 16-bit Cyclic Redun-
; dancy Code for a message of arbitrary length.
;
; (Copyrighted 1981 by Carpenter Associates of Bloomfield Hills, MI.
; May be freely reproduced for non-profit use.)
;
;       This same algorithm is used in COMM700, MDM700 and
;       MODEM700 programs.  Character is in 'A' register.
;
UPDCRC:	MVI	B,8		;8 BITS EACH CHARACTER
	LHLD	CRCVAL		;GET CURRENT CRC VALUE
	MOV	C,A		;STORE TEMORARILY.
;
UPDLP:	MOV	A,C
	RLC
	MOV	C,A
	MOV	A,L
	RAL
	MOV	L,A
	MOV	A,H
        RAL
        MOV	H,A
	JNC	SKIPIT
	MOV	A,H
	XRI	10H
	MOV	H,A
	MOV	A,L
	XRI	21H
	MOV	L,A
;
SKIPIT:	DCR	B
	JNZ	UPDLP		;IF NOT ZERO, MORE BITS TO HANDLE
	SHLD	CRCVAL		;OTHERWISE STORE UPDATED CRC VALUE
	RET
;.....
;
;
;-----------------------------------------------------------------------
;
; PROGRAM STORAGE AREA
; 
BUFAD:	DB	0,0		;READ BUFFER ADDRESS
CRCVAL:	DB	0,0		;'CRC' VALUE STORAGE
FFLAG:	DB	0		;FILE WRITE REQUEST FLAG
MFCUR:	DB	'            '	;CURRENT NAME
MFFLG1:	DB	1		;1ST TIME SWITCH
MFREQ:	DB	'            '	;REQUESTED NAME
NFLAG:	DB	0		;SET TO ZERO IF FILE(S) FOUND
FILLEN:	DB	0,0		;FILLED AUTOMATICALLY
FILEPTR:
	DB	0,0
;
;
; BUILD FCB FOR FINAL NAME OF CHEKLIST.CRC
;
FCBFIN:
	DB	0,'CHEKLISTCRC'
	DB	0
	DS	20
;
;
; OUTPUT FILE (TEMPORARILY NAMED CHEKLIST.$$$)
;
FCBFIL:
	DB	0,'CHEKLIST$$$'
	DB	0
	DS	20
;
	DS	80		;MINIMUM STACK AREA
;
SETEVN: EQU	($+127)/128*128	;SET BUFFER TO EVEN PAGE
;
;
	ORG	SETEVN
;
STACK:	DS	0		;SAVE 2 BYTES FOR OLD STACK POINTER
;
FILADR:	DW	FILADR+2	;BUFFER ALL 'CRC' FILE DATA HERE
;
; 
	END
